The dangers of learning from the Internet
Some people believe that once you have viewed YouTube woodturners’ videos you are up and away. No doubt some are good but there are also a lot of bad (and dangerous!) practices going on out there. You cannot beat face to face, hands on training with approved AWGB trainers.
As an example, on online AI image generation tool was fed the prompt below. A human reading the prompt should hopefully be able to spot the obvious mistakes in the images – an experienced woodturner will know the potentially life altering injuries those mistakes could cause, while an amateur ‘have-a-go’ YouTuber who is after the clicks that danger can bring would continue unphased with the potential consequences.
The prompt :
“A high-resolution photograph capturing the dynamic moment of wood shavings flying off a lathe. The operator, wearing safety spectacles, is using a single skew chisel to create a precise peeling cut from freshly cut timber. The skew chisel is in contact with the lathe’s tool rest, presented to the workpiece at a perfect 90-degree angle, and cutting from just below the tip of the tool farthest from the handle. The operator has both hands firmly gripping the handle of the skew chisel, ensuring control and precision. The scene is well-lit, highlighting the texture of the wood and the motion of the shavings. The operator is dressed in appropriate safety gear, without gloves or any loose clothing, emphasizing safety and professionalism.“

No idea where the tool rest has got to, but if he’s managing to hold that tool in contact with the wood AND generate all those chips then he’s superhuman. He seems to be using two tools and that skew will fly through the roof when it catches on the wood, possibly breaking his wrist on the way …
There’s no way that tool he’s holding is generating those shavings and the large lump of metal on the cutting side of the lathe ? Also, we might talk about smelling the shavings, but you shouldn’t have your face nearly that close to the work.


Sticking a tool directly into the jaws of a chuck isn’t recommended. If you’re lucky you’ll just have a badly chewed tool as the metal jaws make contact with the cutting edge, more likely you’ll have a broken wrist as the tool is twisted violently out of your hand. Either that or your hand is twisted violently off your arm …
Gloves! NO NEVER!! (Google ‘degloving lathe injury’ if you have a strong stomach)
No toolrest and no idea what he’s doing with those tools. Hope he has a phone nearby to dial ‘999’ …

For more details please contact info@gaw.org.uk
